Dual Band Sector Antenna: Custom Mining Communication Solution
Dual Band Sector Antenna
1, Frequency range: 2400-2500MHz & 5150-5850MHz
2, Gain: 13-15dBi
3, Polarization: ±45°
4, Half power beam width: H 65°, V 40°
Specifications
A mining communication systems integrator approached RF element for a rugged dual band sector antenna to keep stable coverage in deep mining tunnels. The project demanded simultaneous 2400-2500MHz and 5150-5850MHz operation, a horizontal beamwidth above 60 degrees, high gain to penetrate dense rock structures, and proven reliability in harsh underground coal mine environments.
Client Challenge
The integrator set strict requirements for the coal mining operation:① Frequency Coverage: Simultaneous 2.4GHz (2400-2500MHz) + 5.8GHz (5150-5850MHz) operation.② Radiation Pattern: Horizontal beamwidth >60° for wide coverage in tunnel networks. ③High Gain: >12dBi at 2.4GHz and >15dBi at 5.8GHz to penetrate dense rock structures.④Harsh Environment: IP67-rated, corrosion-resistant, and explosion-proof certification.
Engineering Innovation
Traditional die-cast radiators could not balance wide beamwidth and high gain. To resolve this trade-off, our R&D team pioneered a laser-cut aluminum sheet radiation structure: 0.1mm tolerance slots control the current distribution, nested multi-resonant dipole arrays optimize each band independently, and the laser-cut construction cuts weight by 40 percent compared with die-cast alternatives.

The finished assembly pairs the laser-cut 6061 aluminum radiator with a UV-stabilized radome and dual N-Female connectors, sealed to IP67 for the harsh underground environment.

Performance Trade-Off Resolution
Parameter Conventional Design RF Element Solution Horizontal Beamwidth ≤45° 62° Gain (2.4GHz) 10-11dBi 12.5dBi Gain (5.8GHz) 13-14dBi 15.8dBi Weight 3.2kg 1.9kg Technical Specifications
Model RFE-DBSA-M2400/5800 Frequency Bands 2400-2500MHz + 5150-5850MHz Gain 12.5dBi @ 2.4GHz / 15.8dBi @ 5.8GHz Beamwidth (H/V) 62° x 14° @ 2.4GHz58° x 8° @ 5.8GHz Polarization Dual-slant ±45° VSWR ≤1.5:1 Power Handling 100W continuous Connector 2 x N-Female Operating Temp -40°C to +85°C Ingress Protection IP67 Material Laser-cut 6061 aluminum + UV-stabilized radome Field Results in Mining Deployment
Across three mining complexes, more than 200 units are now in service. Field data shows a 30 percent signal strength improvement over the previous antennas, and cross-band isolation of -25dB eliminated 2.4GHz/5.8GHz crosstalk. The fleet has recorded zero failures through 12 months of coal dust and humidity extremes, maintenance cost dropped by 60 percent with no corrosion or delamination, and the longest point-to-multipoint link reached 7km.
Why This Dual Band Sector Antenna Succeeded
Laser cutting gave the radiator the pattern flexibility to balance beamwidth against gain, while uniform heat dissipation prevented distortion at continuous high power. The antenna also passed MSHA certification for explosive atmospheres, meeting the mining safety standards the integrator required.
Client Testimonial
"RF Element's dual band sector antenna solved our coverage-depth dilemma in underground mines. Their willingness to abandon conventional approaches and deliver a purpose-built solution enabled seamless VoIP and sensor monitoring across our toughest sites." - Chief Engineer, Mining Communication Systems Ltd.
FAQ — Dual Band Sector Antenna: Custom Mining Communication Solution
What is the Dual Band Sector Antenna: Custom Mining Communication Solution used for?
What frequency band does the Dual Band Sector Antenna: Custom Mining Communication Solution cover?
What are the key specifications of the Dual Band Sector Antenna: Custom Mining Communication Solution?
Can RF element customize the Dual Band Sector Antenna: Custom Mining Communication Solution for my application?
What is the MOQ and lead time for the Dual Band Sector Antenna: Custom Mining Communication Solution?
How do I get a quotation for the Dual Band Sector Antenna: Custom Mining Communication Solution?